Floor Milling Machine RT-2000 Roto-Tiger Multi-Talent

Motor/ Power 2.2 kW (Electric) /

5 HP (Gasoline)

Voltage 230V / 400V
Working width 200 mm
Weight 72 kg

This product is currently out of stock and unavailable.

SKU: RT-2000-EL Category:



The Roto-Tiger RT-2000 Mulit-Talent Scarifier is ideal for mid-sized surfaces.  Wide range of tools for every purpose and in accordance with the required profile. Continuous depth settings from fine to coarse. Operating speed is about 30-50 qm, depending on the surface (Steel, Concrete, Stone, Wood etc.). Very Operator friendly and easy to transport!


  • Roughening of concrete surfaces and asphalt.
  • Scabbling of concrete, asphalt, level differences, rubber deposits, plastic coatings and dirt crusts.
  • Removing of old coats of paint, thermoplastic material, hard tops, tennis courts and sports grounds.
  • Safety Grooving where it is Needed! Ramps, Barns, Walking Areas for People, Animals and Cars.
  • Erasing Traffic Lines, Paint Stripes.
  • Derusting of ship decks, tanks and containers.
  • Cleaning of industrial floors, ramps, driveways, parking areas and cleaning out Cracks and Joints.
  • Brushing Stone, Terrazzo, Tile Floors and Parquet.
  • Cutting of seams in concrete and wood (grooving).
  • Milling of asphalt surfaces.
  • Chipping off rolling skin and incrustations.
  • Renovation of flat roofs, terraces, wooden surfaces, ship decks and bridges.

Surface Preparation, roughening of concrete.

Scabbling, scarifying, grooving, removal of coatings.

Cutting and preparing parquet for removal with a Floor-Stripper. 


Rasping and milling wheels, loosely placed on a rotating work drum, thorough yet gentle rasping and milling off of adhesive, rubber, concrete slurry, uneven spots and old coatings. Hourly rates of 30-50 qm depending on the type of surface (steel, concrete, stone, wood or asphalt).


Standard RT-2000 drum

Article-No.: ES-200-570-1

Standard cutter: HMT-6.44

Article-No.: AT-999-650


  • Strong, solid welded steel construction designed for robust use.
  • With connection for industrial vacuum. EMERGENCY-OFF safety switch.
  • Depth achievement and contact pressure of the rasping and milling wheels can be precisely adjusted with the rotary disk.
  • Adjustable guiding grip allows work very close to the wall.
  • Sturdily dimensioned rubber wheels provide a high degree of operating convenience.
Switch box Schneider

Schneider Electric motor with on/off button, emergency Stop function

Drum control

Drum lever for quick and controlled lift-off

Adjustable height

Adjustable milling depth

Wheel stopper

For a safe transport and good grip on sloping surfaces

Suction port

Connection for industrial vacuum cleaner  for low-dust work

Quick-change system

For a quick and effortless drum change on site

Working Drum

Wide range of different tools


Anti-vibration handle with safety lever


Additional Wheels

For more Balance and easy handling

Level adjustment

Adjustment of uneven Floor Levels up to 2 cm of difference

AIRTEC Pointer​

For the accurate removing of road markings

Shock Absorber

To avoid unwanted contacts and damages

Edge Milling

AIRTEC special drum and attachment for working close to edges and walls

Edge Milling Drum

With 4 axles and 28 cutters

Edge Milling Unit

External edge milling machine

Edge Milling Unit

Internal edge milling machine


VariationsMotor/ PowerVoltage
Standard 230V2.2 kW230V / 50 Hz / 16A
Standard 400V2.2 kW400V / 50 Hz / 16A
Standard Petrol EngineHonda Gasoline5 HP
All Machines 
Working Width200 mm
Dimensions (L x W x H)1100 x 360 x 1190 mm
Weight72 kg
Suction Tube Ø38 mm / 51 mm Tube
Basic equipmentRT-2000-EL and RT-2000-B with 1 standard drum (ES-200-570-1),  all ES-200 Tools are compatible
 equipped with 1 Set HMT-6.44 and spacers
 5.5 metre power cable and plug
 Hexagon spanner
 Operating manual and spare parts list
 Audit Log und Warranty Certificate

Additional information


ES-200-B, ES-200-EL, ES-200-EL-230-9, ES-200-EL-230-CH, ES-200-EL-400-9