Needle Scaler AT-4
Air Consumption | 280 l/min |
Pressure | 6 – 8 bar |
Blows per Min. | 2980 |
Needle length | 180 mm |
Air Consumption | 280 l/min |
Pressure | 6 – 8 bar |
Blows per Min. | 2980 |
Needle length | 180 mm |
Needle Scaler AT-4 with intermediate tube and adjustable front tube with 180 mm Needles. Air-Powered Tool suitable for removal of paint, rust and coatings from steel and concrete surfaces. Standard Needle Scalers are supplied with Round or Flat Front Tube. This allows to concentrate the needle coverage and avoids needle bending.
Optional Needles: Flat tip beryllium copper (non sparking, 180 mm) for potentially explosive areas.
Cleaning of Awkward Hard to reach corners, pipe joints and edges. Needles are available with diameters of 2 mm, 3 mm, 4 mm and 6 mm. When placing your order please indicate the diameter. Needles can be fitted on any toolsize with the corresponding needle holder. Quick Needle change on the job site. In seconds every Needle Scaler can be converted to a powerful Chisel Hammer.
Air Consumption | 234 l/min |
Pressure | 6 – 8 bar |
Blows per Min. | 2980 |
Port | G 1/4″ plug nipple |
Weight | 5.8 kg |
Quantity of Needles 2mm | 111 |
Quantity of Needles 3mm | 49 |
Quantity of Needles 4mm | 35 |
Quantity of Needles 6mm | 14 |
Needle length | 180 mm |