AIRTEC YOUR RELIABLE AND EXPERIENCED PARTNER FOR SURFACE PREPARATION EQUIPMENT AND DIAMOND TOOLS
| Motor/ Power | 2.2 kW (Electric) /
5.5 HP (Gasoline) |
| Voltage | 230V / 400V |
| Working width | 200 mm |
| Weight | 53 – 59 kg |
Light and handy scarifier: Environmentally-friendly and in accordance with the required profile. Continuous depth settings from fine to coarse. Wide range of tools for every purpose. Very Operator friendly!
Scabbling, scarifying, grooving, removal of Concrete.
Removal of spillage, paint, thin coatings.
Cutting and preparing parquet for removal with a Floor-Stripper.
Rasping and milling wheels, loosely placed on a rotating work drum, thorough yet gentle rasping and milling off of adhesive, rubber, concrete slurry, uneven spots and old coatings. Hourly rates of 30-50 qm depending on the type of surface (steel, concrete, stone, wood or asphalt).
Article-No.: ES-200-520-1
Article-No.: AT-999-605
Schneider Electric motor with on/off button, emergency Stop function
Electric motor with on/off button, emergency Stop function
Drum lever for quick and controlled lift-off
Adjustable milling depth
For a safe transport and good grip on sloping surfaces
Connection for industrial vacuum cleaner for low-dust work
For a quick and effortless drum change on site
200 mm Drum with additional borings for double life
For the removal of traffic markings with adjustable working width
For more Balance and easy handling
Compensates for height differences of up to 2 cm
For the accurate removing of road markings
To avoid unwanted contacts and damages
AIRTEC special drum and attachment for working close to edges and walls
With 4 axles and 28 cutters
External edge milling machine
Internal edge milling machine
| Variations | Motor/ Power | Voltage |
| Standard 230V | 2.2 kW | 230V / 50 Hz / 16A |
| Standard 400V | 2.2 kW | 400V / 50 Hz / 16A |
| Standard Petrol Engine | Honda Gasoline | 5.5 HP |
| All Machines | |
| Working Width | 200 mm |
| Dimensions (L x W x H) | 900 x 360 x 1000 mm |
| Weight | 53 – 59 kg |
| Suction Tube Ø | 38 mm / 51 mm Tube |
| Basic equipment | ES-200-EL or ES-200-B with 1 standard drum (ES-200-520-1) |
| equipped with 1 Set HMT-5.40 and spacers | |
| 5.5 metre power cable and plug | |
| Instruction manual and spare parts list | |
| Audit Log und Warranty Certificate |
CE – approved Manufacturer
Quality Processes and Management
ISO 9001:2015 Standards
© All rights reserved by AIRTEC AG
